Xiaomi FRP is not one lock — it is two
Xiaomi devices enforce FRP slightly differently from Samsung. Depending on firmware and region, the lock is cleared either from fastboot with a valid authorised account handshake, or from MTP with the device booted far enough for ADB sideloading.
Picking the wrong path is the single most common cause of a failed Xiaomi FRP bypass. FRPB removes that guesswork by probing the USB descriptor and telling you which recovery route the handset is actually offering.
Fastboot vs MTP — which will FRPB use?
Fastboot mode is entered with the volume-down and power combination and exposes the bootloader. MTP mode is a normal-ish boot where the device presents as a media transfer device and allows ADB commands.
FRPB reads the active USB IDs and picks the method for you. You always see the detected mode before anything runs, so there is no silent flashing.
- 1For fastboot recovery, put the device into fastboot using Volume Down + Power.
- 2For MTP recovery, boot the device normally and enable USB debugging where the firmware permits it.
- 3Let FRPB's Live Device Monitor confirm the mode before continuing.
Running the Xiaomi FRP bypass
- 1Launch FRPB and wait for the driver check to finish — MediaTek and Qualcomm drivers install on demand.
- 2Connect the Redmi, POCO or Mi device and confirm the auto-detected model and chipset.
- 3Click FRP Bypass and accept the authorisation disclaimer.
- 4Watch the live console as FRPB walks the fastboot or MTP recovery sequence.
- 5The device reboots into the setup wizard with the Mi account lock removed.
Common blockers and how FRPB handles them
Anti-Rollback and Region-Locked are the two errors Xiaomi technicians hit most often. FRPB surfaces the raw tool output rather than hiding it, so you can confirm the cause and switch to the documented manual guide the app provides for that exact model.
For stubborn units, the guided manual mode walks through each command with copy-ready steps instead of a single opaque button.